Bondo All-Purpose Putty Gallon 20054

For restoration and remodeling. Use to fill, patch and repair PVC, tile, laminate and ceramic. Ready to sand and paint in 30 min. Accepts paint like wood. No shrinking or cracking. Water-resistant.

Directions for Use
1. Clean repair area with warm, soapy water or a surface cleaner to remove dirt, oil, dust or contaminants; let dry completely.

2. Sand the surface with 3M™ Sandpaper 80 grit to remove all primer, paint, loose rotted wood or rust extending 1 to 2 inches beyond the damaged area. Remove all dust created from sanding. Re-clean the surface following Step #1

3. Remove a 3-inch diameter circle, 1/2 inch thick of Bondo® All-Purpose Putty and place on a clean non-porous mixing surface. Knead the Bondo® Cream Hardener tube thoroughly to ensure contents are well mixed. Squeeze a 3-inch strip/bead of cream hardener across the putty that you removed from the can. (Recommended: mix small amounts that can be used in 3-4 minutes.)

4. Thoroughly mix for approximately 2 minutes using the Bondo® Spreader. Mix the putty and hardener keeping the contents thinly spread out will keep the putty from drying as quickly and give you a longer working time.

5. Spread initial thin layer of mixed putty over repair area using firm pressure to ensure maximum adhesion. Apply additional layers until desired thickness is reached. 6. Allow the putty to dry 15 minutes at 77 degrees F (25 degrees C). In cooler climates, putty may take 20-30 minutes to dry.