A superior lightweight, one-step spackling for repairing walls, ceilings, and woodwork in one fill. Delivers superior durability and performance. No sanding required. Dries quickly. Interior/exterior use.
Surface Preparation & Application:
Surface must be clean, dry and free of foreign material.
Mix gently before use.
Using a clean putty knife, press spackling into hole
or crack. Draw blade firmly across the surface to
remove excess material in one strike.
For a smoother finish, dip putty knife in
to water and lightly smooth spackling.
One coat should be sufficient for small repairs
May be painted within minutes with a latex paint.
Please follow paint manufacturer’s instructions for
application.
If sanding is desired, or if an oil-based paint is
to be used, allow to drythoroughly (approximately 24
hours).
Clean tools immediately with water.
For Best Results:
Do not apply when temperatures are below 40°F.
Do not apply outside if rain is expected within 24 hours.
Do not use on floors or as a caulk, sealant or joint
filler over cracks and joints where expansion and
filler over cracks and joints where expansion and
contraction may occur.
DO NOT USE AS A SKIM COAT.
For exterior application, first apply
exterior-grade primer, then apply
spackling and finish with coating
of quality exterior-grade paint.
Do not use for tuck pointing applications on brick.
Clean Up:
Wash tools immediately after use with water. Dried
material must be cut of scraped away. Be sure
container lid is closed and tightly sealed. Store in
a cool, dry place away from extreme heat or cold.
