Directions for use:
PREPARATIONS: Stir before using. Brush or spray on. Trim should be clean, deglossed and ready for painting. MASK & SEAL will peel off glass and most smooth, uncoated flat metal surfaces or glossy painted trim. APPLY: 1. BRUSH on thick coat one inch wide to glass and on to edge of trim or SPRAY entire window area. Apply only when surface temperature is between 40 to 90º F. Reapply if too thin to peel. Paper can be stuck to WET MASK & SEAL on the glass edge to protect from paint overspray…do not stick to trim. 2. After MASK & SEAL changes color from white to clear (approx. 30 minutes), apply paint (oil or latex) to trim and edge of glass to seal. Let paint dry. REMOVE: Notch and cut carefully along the edge of the trim. Peel paint off the glass now or within a month or two. Peels best when cool. WEATHERPROOFING: Brush on two applications to edge of trim and glass. CLEANUP: Wash tools and hands with water COVERAGE: Gallon: BRUSH—1" x 3000 linear feet SPRAY: 256 sq.ft. (thin with water, if needed) STORAGE: KEEP FROM FREEZING HELPFUL TIPS: Test all surfaces in an inconspicuous place for compatibility and finish quality before using. Test older glass for peel-ability if it is showing scratches, hazing or pitting, before general use.
