Krud Kutter Graffiti Remover 32oz

Graffiti Remover. The ultimate spray paint graffiti remover. A safe alternative to hazardous solvent-based graffiti removers. Effective on most hard, soft, and porous surfaces. Works on concrete, brick, cinder block and street signs. No unpleasant odor. Removes: acrylic, acrylic enamel, aerosol paint, enamel, high gloss, oil lacquers, primers, sealers, semi-gloss, Speed-E-Namels, stain killers, super enamels, urethane enamels, and water-based enamels.

Directions for use:
Always test on an inconpicuous area first. May dull some painted surfaces. Not recommended for use on non-colorfast materials, or woodwork.
Directions for hard & soft surfaces such as signs, plexiglass & vinyl:
1. Thoroughly spray area damaged by graffiti, and wait 1-2 minutes.
2. Wipe off with a clean cloth or towel.
3. Repeat if necessary.
Directions for porous surfaces such as concrete & brick:
1. Thoroughly spray area damaged by graffiti, and wait 3-5 minutes.
2. Use a brush to agitate and loosen graffiti.
3. Hose off with water, or use pressure washer, and wipe with a clean towel.
4. Repeat if necessary.
COVERAGE: 50sq.ft./quart; 200sq.ft./gallon.

CAUTION
Eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention.
DO NOT MIX THIS PRODUCT WITH ANY OTHER CHEMICALS.
KEEP OUT OF REACH OF CHILDREN.
CONTAINS: A proprietary blend of biodegradable surfactants, detergents, and emulsifiers, in a water-based solution. No petroleum solvents, bleach or ammonia.