Minwax Tung Oil Finish Pt. - (Box of 6)

Minwax® Tung Oil Finish is an oil-based protective finish that also gives wood a hand-rubbed lustre. Minwax® Tung Oil Finish penetrates wood pores and restores vitality to dry, thirsty wood. Minwax® Tung is easy to maintain and can be applied over stained and unstained wood.

Directions
1. Sand to obtain a smooth, uniform surface. Remove all dust with a cloth dampened with mineral spirits.
2. Apply Minwax® Wood Finish™ Stain, if desired, following the label directions.
3. Wipe or brush on a generous coat of Minwax® Tung Oil. Apply in the direction of the grain.
4. After 5-10 minutes, buff evenly with a clean, lint-free cloth.
5. Wait 24 hours and apply a second coat. Two coats are recommended.
6. For additional gloss, repeat after 24 hours.
7. With Minwax® Tung Oil you control the brightness of the finish because the surface gains more gloss with each coat you apply.

Cleanup: Use mineral spirits or paint thinner following manufacturer’s safety instructions

Note: Not recommended for floors