Roman Pro 505 Activator for Pre-Pasted Wallpaper provides adding holding power and eliminates messy water soaking. Minimizes seam separation. Covers approximately 360 square feet per gallon.
Coverage:
Approximately 360 square feet per gallon
Tinting:
Dilution:
Application Method:
Drying Time:
Clean-Up:
Surface Preparation:
Surface must be free from grease and
other residues, dry, smooth and structurally sound. Check
surfaces for paint bonding, loose wallcoverings, damaged
wall-board or plaster. Repair all unsound surfaces. Prime all
surfaces (including oil-based coatings) with an acrylic wallpaper
primer, such as ROMAN® PRO-977,ULTRA PRIME®.
Before proceeding with any unusual conditions, consult your
adhesive or wallcovering supplier.
Tinting:
N/A
Dilution:
Do not dilute.
Application Method:
Use only when the room temperature is above 50F.
Apply an even coat of activator with a pasting
Apply an even coat of activator with a pasting
machine, brush or roller. Book according to the
wallcovering manufacturerʼs instructions.
Drying Time:
Varies, depending on the temperature,
ventilation and humidity of the room.
Clean-Up:
Before the activator dries, remove any excess
with clean water.
