Roman Pro 555 Vinyl Over Vinyl Wallpaper Adhesive provides maximum adhesion. Eliminates priming/sizing. Has excellent slip and open time. Covers approximately 160 square feet per gallon.
Coverage:
Approximately 160 square feet per gallon
Surface Preparation:
Surface must be free from grease and
other residues, dry, smooth and structurally sound. Be
certain existing wallcovering is firmly attached to the wall. Be sure
to repair or remove all loose wallcoverings. Before
proceeding with any unusual conditions, consult your adhesive
or wallcovering supplier.
Application Method:
IMPORTANT: A thick coat is less effective than a thin
Avoid contact with the surface of embossed, textured
Drying Time:
Clean-Up:
Tinting:
N/A
Dilution:
Do not dilute.
Application Method:
Use only when the room temperature is above
50F. Apply a thin, even coat of adhesive.
IMPORTANT: A thick coat is less effective than a thin
coat.
Avoid contact with the surface of embossed, textured
or delicate wallcoverings. On existing heavily
embossed wallcovering, VOV should be applied to both the existing
and the new vinyl.
Drying Time:
Drying time between two vinyls will vary
depending on the temperature, ventilation and humidity of
the room.
Clean-Up:
Before the adhesive dries, remove the excess with
clean water. Additional effort may be required if the
adhesive is allowed to contact the surface of embossed or
textured vinyls. The adhesive can be difficult to clean up after it
dries.
