VINYL PREP is an economical acrylic primer for general purpose applications such as over bare drywall and sound flat latex paint. This fast drying primer offers good film integrity and excellent water resistance for double-cutting and strippability. Dries clear. Approximately 450 square feet per gallon. Low odor and no splatter.
Coverage:
Approximately 450 square feet per gallon
Tinting:
Dilution:
Application Method:
Airless Spray:
Drying Time:
Clean-Up:
Surface Preparation:
Surface must be free from grease
and other residues, dry, smooth and structurally sound. Check
surfaces for paint bonding, damaged wallboard or plaster.
Repair all unsound surfaces. Before proceeding with any
unusual conditions, consult your adhesive or wallcovering
supplier.
Tinting:
Can be tinted with universal tints; 4 oz./gal. maximum
Dilution:
Do not dilute.
Application Method:
Use only when the room temperature is above 50ºF.
Apply a thin, even coat of primer with a brush,
roller, or spraying system.
Airless Spray:
Pump: 45:1
Hose: 1/2” I.D.
Tip Size: .015 and larger
Gun psi: 1500-1700
Gun psi: 1500-1700
Drying Time:
VINYL PREP® is dry and ready to hang over in
less than one hour. Low temperature, high humidity and poor
ventilation will slow down the drying process.
Clean-Up:
Before the primer dries, remove any excess with
clean water. Brushes and rollers should be cleaned immediately
after use with warm, clean water.
