Rx-35 Sealer/Primer repairs torn drywall to create a wall surface that can be floated, spackled, painted or hung with wallpaper. It is also the perfect primer for skim coats, spackling, residual paste, popcorn ceilings, contractors flat paint or mud joints. It dries with a slight residual tack, enhancing adhesion of wallpaper or paint.
Coverage:
Approximately 350-450 square feet per gallon,
depending on the porosity and texture of the surface.
DO NOT DILUTE.
Apply a generous coat of primer with a brush,roller
Drying Time:
Clean-Up:
Surface Preparation:
Surface must be free from grease and other residues, dry, and
structurally sound.
Application Method:
Application Method:
Use only when the room temperature is above 50ºF.
DO NOT DILUTE.
Apply a generous coat of primer with a brush,roller
or spraying system. If using a spray system, back
rolling is recommended.
Drying Time:
Rx-35™ is dry and ready to paint or hang over
in one and a half hours. It is dry to the touch in
one hour. Low temperature, high humidity and poor
ventilation will slow down the drying process.
ventilation will slow down the drying process.
If applying over new drywall or sealed
surfaces, the drying time may be extended.
Clean-Up:
Before the primer dries, remove the excess with
clean water. Brushes and rollers should be cleaned
immediately after use with clean, warm water.
