WoodRx 1 Gal Ultra Natural Transparent Exterior Wood Stain/Sealer 62561 - (Box of 4)

WOOD Rx ultra spreads effortlessly and evenly and its unique formulation resists the lapping characteristics inherent in most transparent wood sealers. The ultra formulation also exhibits uniform wear characteristics which makes maintaining wood quick and easy. This silicone modified acrylic formulation resists moisture penetration, retards the aging (silvering) process of new wood and contains an increased level of fungicide which resists mildew growth in the harshest climates. WOOD Rx ultra is the best prescription for wood protection.

RECOMMENDED USES:  For use on virtually all properly prepared, exterior wood surfaces such as decks, docks, sidings, specialty hardwoods, pressure treated lumber, garden furniture, playhouses and log/timber frame homes.   Do not apply over previously painted or stained wood surfaces without proper preparation.  New pressure treated wood should weather for six months prior to applying WOOD Rx. 

SURFACE PREPARATION: 1. Apply a solution of 1 part household bleach or bleach alternative, 1 part dishwashing soap and 4 parts water. 2. Scrub and/or pressure wash as necessary to remove any surface contaminants.   3. Apply a test sample of WOOD Rx ultra to insure proper adhesion and an appealing appearance.  If beading or crawling occurs, contact INSECO prior to applying.  

APPLICATION: 1. Stir WOOD Rx ultra thoroughly before use.  2. Apply with a brush, roller, foam pad, pump garden sprayer or airless sprayer 3. Saturate the entire surface but avoid puddling. 4. Resists lapping but working with wet edge and back brushing is recommended.   5. Apply 1-2 coats as required to achieve a uniform appearance.  Two coats are recommended for maximum performance.  Allow 1-2 hours between coats.    
6. WOOD Rx ultra may be applied to damp or dry wood.      

CLEAN UP: Clean up drips and spills immediately using a damp cloth.  Clean tools and equipment with soap and fresh water.    

CAUTION: Do not apply if the threat of rain exists.  Keep from freezing. Keep out of reach of children.  Do not use if temperature is below 40 degrees F.

Matte Finish
Average Dry Time @ 75 deg. F (24 deg. C): Touch 30 minutes.  Recoat 1-2 hours.  Foot traffic 12 hours. 

Recommended Dry Film Thickness Per Coat:   WOOD Rx ultra is designed to penetrate and seal. Coverage (Theoretical): Coverage will depend on porosity and contour of the surface being coated.  Coverage typically averages 400 square feet per gallon.  Two coats are always recommended for maximum performance.