Directions for use:
1. Saturate the adhesive by applying a liberal amount directly onto the finish.
2. Allow time for the remover to work. It will loosen most finishes in 15-30 minutes.
3. Test scrape a small area to see if finish is ready for removal.
4. Scrape away the softened adhesive with a wide putty knife or scraper.
5. Multiple coats or stubborn finishes may require repeat applications.
6. For final clean-up, apply onto the surface and wipe clean.
7. Before installing new floor covering, allow surface to dry for 1 hour or more.
COVERAGE: 50sq.ft./quart
CAUTION
Eye and skin irritant. In case of contact with eyes or skin, flush with water for 15 minutes. If irritation persists, seek medical attention. If swallowed, take large amounts of water. Do not induce vomiting. Get medical attention.
DO NOT MIX THIS PRODUCT WITH ANY OTHER CHEMICALS.
KEEP OUT OF REACH OF CHILDREN.
CONTAINS: A proprietary blend of biodegradable surfactants, detergents, and emulsifiers, in a water-based solution. No petroleum solvents, bleach or ammonia.
