Minwax Wipe-On Poly Pint Satin - (Box of 6)

Minwax® Wipe-On Poly is a durable, clear polyurethane that provides protection with classic, hand-rubbed beauty. Minwax® Wipe-On Poly is applied with a cloth that avoids drips and brush marks.

1. Surface must be dry and free of old finishes in poor condition, wax, grease, polish, dirt or other foreign matter.
2. Sand to obtain a smooth, uniform surface. Remove all dust with a cloth dampened with mineral spirits.
3. If desired, apply stain, such as Minwax® Wood Finish™, following the label directions for application instructions and dry times.
4. Shake Wipe-On Poly container thoroughly before use.
5. Put a liberal amount of Wipe-On Poly on a clean, soft, lint-free cloth and rub into the wood.
6. Allow to dry at least 2-3 hours. Sand entire surface lightly with very fine sandpaper (220 grit) or fine steel wool. Remove all sanding dust.
7. Apply a second coat in the same manner as the first. If a third coat is desired, repeat Step 6 before application.
8. Allow final coat to dry 24 hours before normal use.

Cleanup: For easy cleanup, use mineral spirits or paint thinner.

Coverage: Approximately 125 sq. ft. per quart.

Floors: Wipe-On Poly may be used to touch up small scratches on floors. Apply carefully as gloss level may not be identical to the existing floor finish.

Note: Wipe-On Poly is not recommended for general use on floors.