PC-Clear Epoxy Syringe

PC-Clear™ is a completely clear liquid epoxy. PC-Clear™ is formulated to remain clear during and after its curing time. PC-Clear™ is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear™ is your product of choice. PC-Clear™ demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. ***Note: PC-Clear™ will not bond to wax paper, Teflon®, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt. Directions: 1oz Syringe 1. Remove tip from end of dispenser 2. Depress plunger evenly to dispense equal amounts of resin and hardener. Back off plunger to reduce flow 3. Mix thoroughly on flat surface 4. Replace tip on nozzle 5. Dispose of empty cartridge in proper manner Apply PC-Clear™ in any thickness to both sides of surface and bring together firmly. Be careful to insure that ample PC-Clear™ remains between the contact surfaces. To smooth out work, dip tool in lacquer thinner or denatured alcohol.