Name: Rust-Oleum Stops Rust Satin Enamel Spray Paint
Brand: Rust-Oleum
SKU: 7720830
Availability: InStock

Description

Rust-Oleum Stops Rust Satin Spray applies low-sheen satin finish to metal, wood, concrete or masonry. Use on furniture, fixtures and outdoor décor. Dries into smooth, protective enamel.PRODUCT FEATURES: Indoor/Outdoor Nature-inspired colors Durable, corrosion-resistant Scroll to bottom of page for color chart Item Numbers Ending In the Letter "R" Are Sold Only By The Box and Usually Ship in 10 to 14 Business Days. These are special order items and can NOT be returned for credit or exchange and the order can NOT be cancelled once it has been placed. This Item Can NOT Be Shipped Internationally

Use outdoors or in a well ventilated area such as an open garage. Use when temperature

is between 50-90°F (10-32°C) and humidity is below 65% to ensure proper drying.

Do not apply to surfaces, when heated, exceed 200°F (93°C). Do not apply to galvanized steel.
Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

SURFACE PREPARATION

Remove all dirt, grease, oil, salt and chemical

contaminants by washing the surface with a commercial

detergent, or other suitable cleaning method. Rinse with

fresh water and allow to thoroughly dry. Remove loose

paint and rust with a wire brush or sandpaper. Previously

coated surfaces must be sound and in good condition.

Smooth, hard, or glossy finishes should be scarified by

sanding to create a surface profile.

WARNING! If you scrape, sand or remove old paint from any surface, you

may release lead paint dust. LEAD IS TOXIC.

EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS

ILLNESS, SUCH AS BRAIN DAMAGE; ESPECIALLY IN

CHILDREN. PREGNANT WOMEN SHOULD ALSO

AVOID EXPOSURE. Wear a NIOSH approved respirator

to control lead exposure. Clean up carefully with a HEPA

vacuum and a wet mop. Before you start, find out how to

protect yourself and your family by contacting the National

Lead Information Hotline at 1-800-424-LEAD or log on to

www.epa.gov/lead.

PRIMING

Use of a Rust-Oleum primer provides added corrosion

protection, excellent adhesion and hiding and is especially

recommended for bare wood and metal. The following

primers are recommended.

7769

Rusty Metal Primer

7780

Clean Metal Primer

2081

Light Gray Auto Primer

2067

Red Auto Primer

2089

Dark Gray Auto Primer

APPLICATION

Shake can vigorously for one minute after the mixing ball

begins to rattle. If mixing ball fails to rattle DO NOT

STRIKE CAN. Contact Rust-Oleum. Shake often during

use. Hold can upright10-16" from surface and spray in a

steady back-and-forth motion, slightly overlapping each

stroke. Keep the can the same distance from the surface.

Keep the can in motion while spraying. Apply two or more

light coats a few minutes apart to avoid drips and

runs. Do not use near open flame.

DRY AND RECOAT

Dry and recoat times are based on 70°F and 50% relative

humidity. Allow more time at cooler temperatures. Dries to

touch in 2-4 hours, to handle in 5-9 hours, and fully dry in

24 hours. Recoat before 1 houror after 48 hours.

CLEAN UP

Wipe off tip before storing. Clean-up wet paint with xylene

or mineral spirits. Properly discard empty container. Do

not burn or place in home trash compactor.

CLOGGING

If the valve clogs, twist and pull off spray tip and rinse

in a solvent such as mineral spirits. Do not insert any object

into can valve opening.