A high-performance formula of texture additives that emulsify and become part of any paint. For use on drywall, plaster, cement block, poured concrete, stucco, brick or wood. Available in Fine, Medium or Coarse particle size for three distinct types of texture finishes. Roll-A-Tex Fine, Medium & Coarse Texture Additive * Permanently fills and covers cracks and flaws * Eliminates the need for tedious and time-consuming crack repairs * Hides building defects * Covers repaired surfaces in one coat, without priming * Prevents soaking, blotching and uneven paint color * Restores and beautifies in one low-cost application with a roller or brush
Medium Texture is designed for interior or exterior
Coarse Texture is excellent for interior or exterior surfaces
Fine Texture is designed for use on interior or exterior
surfaces providing a “one-step” texture for any new
construction surface. This easy-to-apply texture covers
hairline cracks on repaired surfaces.
Medium Texture is designed for interior or exterior
surfaces providing excellent repair qualities to fill and
cover moderately flawed and cracked surfaces. It may be
used on smooth surfaces where a pronounced textured
look is desired or with extensively cracked walls that
require extra cover-up.
Coarse Texture is excellent for interior or exterior surfaces
where a higher degree of “fill-in” and covering qualities are
required. It is suitable for use on large cracks and
extensively repaired surfaces or wherever a more defined
texture is desired. It provides excellent texturing to cinder
blocks and brick in only one coat.
COVERAGE
INSTRUCTIONS FOR USE
CLEAN-UP
COVERAGE
Coarse–80 to120 square feet–depending on product application
Medium–100to120 square feet–depending on product applicationFine–150 to200 square feet–depending on product application
INSTRUCTIONS FOR USE
Apply only when air, material, and surface temperatures
are between 50-90ºF (10-32ºC) and the relative humidity
is below 85%. While mixing, wear a NIOSH approved dust
mask. In a separate container, add the contents of the
package to one gallon of any paint. Add less for surfaces
in good condition and more for surfaces that require more
hiding and texturing. Thoroughly mix to ensure that the
contents are incorporated. For best results, keep the
mixture as thick as possible for best coverage. Use a
⅜” to ¾” nap roller cover. Apply with light pressure and roll
out on the surface. Less rolling will produce a better texture. A
second coat of paint may be applied after partial or
complete drying for greater hiding and a better texture.
CLEAN-UP
Clean hand and application tools with warm soapy water.
